Section 150.2(b)2A – Link to Sections 110.0 through 110.9, Sections 150.0(a) through (l), Sections 150.0(m)1 through 150.0 (m)10, and Sections 150.0(p) through (q)
‘Standards
Section 110.0 SYSTEMS AND EQUIPMENT GENERAL
Section 110.1 MANDATORY REQUIREMENTS FOR APPLIANCES
Section 110.2 MANDATORY REQUIREMENTS FOR SPACE CONDITIONING EQUIPMENT
Section 110.3 MANDATORY REQUIREMENTS FOR SERVICE WATER HEATING SYSTEMS AND EQUIPMENT
Section 110.4 MANDATORY REQUIREMENTS FOR POOL AND SPA SYSTEMS AND EQUIPMENT
Section 110.6 MANDATORY REQUIREMENTS FOR FENESTRATION PRODUCTS AND EXTERIOR DOORS
Section 110.7 MANDATORY REQUIREMENTS TO LIMIT AIR LEAKAGE
Section 110.8 MANDATORY REQUIREMENTS FOR INSULATION ROOFING PRODUCTS AND RADIANT BARRIERS
Section 110.9 MANDATORY REQUIREMENTS FOR LIGHTING CONTROLS
Section 150.0(a) Roof Deck Ceiling and Rafter Roof
Section 150.0(b) Loose fill Insulation
Section 150.0(c) Wall Insulation
Section 150.0(d) Raised floor Insulation
Section 150.0(e) Installation of Fireplaces
Section 150.0(f) Slab Edge Insulation
Section 150.0(g) Vapor Retarder
Section 150.0(h) Space Conditioning Equipment
Section 150.0(j)1 Insulation for Piping and Tanks
Section 150.0(j)2 Insulation for Piping and Tanks
Section 150.0(k) Residential Lighting
Section 150.0(m)1 CMC Compliance
Section 150.0(m)2 Factory Fabricated Duct Systems
Section 150.0(m)3 Field Fabricated Duct Systems
Section 150.0(m)4 Duct Insulation R value Ratings
Section 150.0(m)5 Duct Insulation Thickness
Section 150.0(m)6 Duct Labeling
Section 150.0(m)7 Backdraft Dampers
Section 150.0(m)8 Gravity Ventilation Dampers
Section 150.0(m)9 Protection of Insulation
Section 150.0(m)10 Porous Inner Core Flex Duct
Section 150.0(p) Pool Systems and Equipment Installation